Lack of knowledge Archive

Chapter 6. Planned (Effective) Maintenance. Part 2

Author: | Categories: Instructor Training No comments
4. Carrying out Effective Maintenance 4.1 The Structure of Equipment Maintenance Equipment maintenance can be defined as preventing machines from breaking down by selecting what type of maintenance should be used on which parts of which machines, formulating maintenance standards, and then systematically maintaining and controlling the machines in

What is a Breakdown?

The unexpected stoppage of a equipment where a part is required or a repair over 10 min is required to restore machine functionality. Examples (Breakdowns): Seized cam replaced (25 min); Suction cup replaced (5 min); Broken cylinder replaced (35 min) Examples (Non-Breakdowns): Guide rail adjusted (10 min) Knife jam

What are F-tags?

Author: | Categories: Blog, Linkedin, Tools No comments
FUGUAI = DEVIATION<->ABNORMALITY Functional Defects Pollution Difficult to Access/Observe Hard to Load/Operate Unsafe Safety, Health, Environment, Quality (SHEQ) “unfriendly” Undesirable Tasks “F” Tags are used to highlight Deviations, Faults or Abnormalities. 3 Types of F-Tags Safety Safety F-Tags are written by everyone for everyone.  Mechanics or operators can close