Forced Deterioration Archive

Autonomous Maintenance Step 2

Author: | Categories: Autonomous Maintenance No comments
AM Step 2: Countermeasures for SOCs & HTAs Objective:  Countermeasures for SOCs and HTAs Stated in other Words: Prevent causes of dust, dirt, and leakage Improve places which are difficult to clean, inspect, and lubricate Reduce time required for cleaning, inspection, and lubrication AM Step 2 Sub-sections Step 2

Chapter 6. Planned (Effective) Maintenance. Part 2

Author: | Categories: Instructor Training No comments
4. Carrying out Effective Maintenance 4.1 The Structure of Equipment Maintenance Equipment maintenance can be defined as preventing machines from breaking down by selecting what type of maintenance should be used on which parts of which machines, formulating maintenance standards, and then systematically maintaining and controlling the machines in

What is a Breakdown?

Author: | Categories: Blog No comments
The unexpected stoppage of a equipment where a part is required or a repair over 10 min is required to restore machine functionality. Examples (Breakdowns): Seized cam replaced (25 min); Suction cup replaced (5 min); Broken cylinder replaced (35 min) Examples (Non-Breakdowns): Guide rail adjusted (10 min) Knife jam

What are F-tags?

Author: | Categories: Blog, Tools No comments
FUGUAI = DEVIATION<->ABNORMALITY Functional Defects Pollution Difficult to Access/Observe Hard to Load/Operate Unsafe SHEQ “unfriendly” Undesirable Tasks “F” Tags are used to highlight Deviations, Faults or Abnormalities. 3 Types of F-Tags Safety Safety F-Tags are written by everyone for everyone.  Mechanics or operators can close these. Yellow color. Operator